04 Toyota Tundra Headlight Adjustment

Unplug the two harnesses that hook into the headlight if needed and it is ready to be removed the car.

04 toyota tundra headlight adjustment. Use the mark as a reference point for your headlights. You want the low beam to be within two-inches of the mark. The lights should reflect 21 in 52 mm below headlight height B.

Youll need to turn it a lot to make a noticeable difference. EVO Lighting LED Halo Kit for Headlights. Not so much a screw but a knob with screw-type threads around it.

Insert a number 2 Phillips screwdriver into the hole in front of the mounting screw on the headlight assembly. By reading this article you agree it is for reference only and AlphaRex USA and its distributors make no guarantee on the finished results. - back the truck away from the wall to a distance of 3 meters 984 feet from the wall surface to the headlights - turn on low beams - the low beams should hit the wall 209 mm 0823 in _below_ the line headlamp height based on designed 4.

The attached document below may help in adjusting your lights. If necessary open the hood and adjust the headlights by turning the vertical adjuster. Determine if the headlights are aimed properly.

Tundra headlight adjust. But roughly there are two screws one for the side-to-side adjustment and one for up-and-down adjustment. Check for a screw behind the bulb.

The fixed point is the upper inside of the headlight housing near the grill. Red arrow indicates the side-to-side adjuster and his finger. Icon 30 Coilover Stage 2 SDHQ Traction Bars Nitro 488 gears AlphaRex Headlights Katskin Leather Method 17 Vex with 35Toyo MTs Eaton Rear Locker N-Fab MRDS.