2006 Toyota Tundra Reset Low Tire Pressure Light

There is a button to do this.

2006 toyota tundra reset low tire pressure light. Turn the ignition key to the ON position without starting the engine. All information how to reset low tire pressure warning light is taken from Toyota Tundra 2 generation owners manual. Adjust the cold tire pressure in all four tires recommended on the tire placard.

Contact your Toyota dealer. Many Toyota Tundra models are outfitted with a tire-pressure-monitoring system that displays a low-tire-pressure warning on the control panel if it detects one of the tires is low. Inflate each tire to its ideal PSI then deflate the tires to zero.

Then inflate again and drive for a couple of minutes at 15 mph to manually calibrate the sensors. With the car running or the Key On hold down the button til the yellow light begins to flash. If the warning light blinks the tire pressure warning system may be malfunctioning.

First Gen Tundra 2000-2006. How do I reset my low tire pressure warning light on my 2006 toyota tundra. Adjust the cold tire pressure in all four tires recommended on the tire placard.

The system should only be reset when all of the tires. I had the tire pressure set 35psi in all 4 tires and 44psi in the spare. The button is located either on the drivers side around where your knees are positioned or it will be inside the glovebox.

It will flash approx. If you are unable to find it refer to your vehicles owners manual. 11 Pull the piece surrounding the stereo out.